3D Printer Dual Extrusion Module

• Snapmaker 3D Printer Dual Extrusion Module
• Equipped with 3s Hot End Switch and 300 閹虹煰 Dual Extrusion
• Supports multi-color printing and various materials
• Features auto leveling and intelligent job recovery
• Operates optimally at a temperature of 15 – 30 閹虹煰

The Snapmaker 3D Printer Dual Extrusion Module is a sophisticated device designed to augment the functionality of the Snapmaker 3-in-1 3D printer. This module is equipped with a 3s Hot End Switch, 300 閹虹煰 Dual Extrusion, Soluble and breakaway Supports, Advanced Materials Printing, a 4-fan Cooling System, Multi-sized Nozzle Compatibility, Auto Levelling, and Intelligent Job Recovery. It also incorporates a direct drive extruder. This module is designed to be compatible with various models of the Snapmaker 2.0 series.

The Dual Extrusion Module is particularly advantageous for crafting intricate prints with fine details, gadgets that integrate PLA and TPU, and dual-color objects. It also facilitates multi-color printing. The module is designed with a quick-swap hot ends feature, allowing the hot end to be easily removable in seconds. This feature enables the inclusion of engineering materials such as PA-CF, and PA-GF in the printing process.

The module is engineered with a 7.5:1 planetary gear system that transmits power from the motor with significantly greater torque. This allows for the use of relatively small motors to achieve the required pulling force, resulting in minimal vibration of the tool head at the same rate of acceleration, thus maintaining the same printing precision as the single extrusion module.

The module also supports auto leveling, power-loss, and filament run-out recovery. It is equipped with a proximity sensor in the module that gathers data for each point on the heated bed, which is then automatically processed by the controller. The module also supports various nozzle sizes, allowing for smarter use of nozzles and tuning of settings with each nozzle size.

The module measures 108 x 70 x 133 mm and weighs 1 kg. It supports a maximum nozzle temperature of 300 閹虹煰 and a maximum recommended printing speed of 100 mm/s. It is compatible with various materials including PLA, ABS, ASA, PETG, TPU, Breakaway PLA, PVA, HIPS, Nylon, Carbon Fiber Reinforced Nylon, and Glass Fiber Reinforced Nylon. The module operates optimally at a temperature of 15 – 30 閹虹煰.